欢迎来济南壹诺包装有限公司网站!在线留言
  • 全国电话服务热线:400-801-0899

当前位置:首页 > 新闻中心 > 公司动态
纸箱包装的形式有几种
来源:www.sdynbz.com 发布时间:2024-02-12 浏览次数:122

纸箱是食品厂、玩具厂、酒厂、鞋厂、药厂等必要的包装产品,由于出于运输、保护、或者产品质量要求,必须使用的包装纸箱,这些纸箱的抗压、边压、粘合度、抗震等等性能都要经过严格的测试,米道设计是专业为企业定做包装纸箱的厂家企业,下面我们极少纸箱形式有哪些:

Cartons are necessary packaging products for food factories, toy factories, distilleries, shoe factories, pharmaceutical factories, etc. Due to transportation, protection, or product quality requirements, packaging cartons must be used. The compressive strength, edge pressure, adhesion, seismic resistance, and other performance of these cartons must be strictly tested. Rice design is a professional manufacturer of customized packaging cartons for enterprises. Below are the few forms of cartons we have:

包装箱产品

Packaging box products

纸箱一般分为A型,B型,C型,包装纸箱及啤盒,刀卡,隔板

Cartons are generally divided into types A, B, and C, with packaging boxes and beer boxes, knife cards, and partitions

1,A型:常见的有A1:一般标准型;A3:有底无盖或有盖无底型;A5:双盖完全交插

1. Type A: Common types include A1: General standard type; A3: Bottom without cover or cover without bottom type; A5: Double cover fully interlocked

2,隔板指纸箱中上,中,下,左,右物体相隔离起保护作用的纸板.刀卡是指同一层上物体以蜂窝巢式包装时用的带切口且相互扣合的纸卡

2. The partition refers to the cardboard that separates the upper, middle, lower, left, and right objects in the cardboard box for protection. The knife card refers to the paper card with a cut and interlocked when packaging objects on the same layer in a honeycomb nest style

3,C型是一般包装鞋子的纸盒,它有天地盖子

3. Type C is a cardboard box for general shoe packaging, which has a top and bottom lid

4,包装式纸箱:类似A5纸箱,但一般直接贴胶带包装,不采用钉装方式,可分为中开式或旁开式

4. Packaging type cardboard box: Similar to A5 cardboard box, but generally packaged directly with adhesive tape and not nailed, it can be divided into open center or side opening type

瓦楞纸板的楞型

The corrugated shape of corrugated cardboard

A 4.5~5 34±

A 4.5-5 34 ±

B 3.5~4 38±

B 3.5-438 ±

C 2.5~3 50±

C 2.5-350 ±

E 1.1~2 96±

E 1.1-296 ±

Ι:楞型:一般按瓦楞大小(用楞高和瓦楞分布密度表示)分A、B、C、E、四种楞型。外包装采用A、B、C型,中包装常用B、E型,小包装用E型。

Ι: Corrugation type: Generally, there are four types of corrugation types, A, B, C, E, based on the size of the corrugation (represented by corrugation height and corrugation distribution density). The outer packaging adopts A, B, and C types, while the middle packaging commonly uses B and E types, and the small packaging uses E types.

∏:各楞型的特点:

π: Characteristics of each ridge type:

20220308101518106.jpg

A型:楞高而宽,缓冲性能好,瓦楞方向抗压强度大,适合包装包装重量轻或易碎品(楞高4.5- - 5 mm,楞数34±2个∕

Type A: The corrugation is high and wide, with good cushioning performance and strong compressive strength in the direction of corrugation. It is suitable for packaging lightweight or fragile products (corrugation height 4.5-5 mm, corrugation number 34 ± 2 pieces/)

B楞:楞低而密,平压强度大,缓冲性能中等,表面平整有利于印刷。多用于罐头食品包装或制作形状复杂的组合包装箱,(楞高2.5--3mm,楞数50±2个∕

B ridge: The ridge is low and dense, with high flat compression strength and moderate cushioning performance. The surface is flat and conducive to printing. Commonly used for packaging canned food or making complex shaped combination packaging boxes, with a height of 2.5-3mm and a number of 50 ± 2 pieces per unit

C型:楞高和楞密度介于A、B之间,性能接近A型,由于其厚度小于A型,从经济性考虑,在一般商品包装中采用较多,(楞高3.5--4mm,楞数38±2个∕

Type C: The height and density of the corrugations are between A and B, and the performance is close to Type A. Due to its thickness being smaller than Type A, it is more commonly used in general product packaging for economic reasons, with corrugations ranging from 3.5-4mm in height and 38 ± 2 corrugations per unit

E型:瓦楞纸板厚度更小,表面光滑,具有良好的印刷效果和切口开槽性能。用它制造的纸盒比普通纸板盒缓冲性能好,已广泛应用于内包装及单个销售包装,(楞高1.1--2mm,楞数96±4个∕

E-type: Corrugated cardboard has a smaller thickness, a smooth surface, and good printing effect and notch slotting performance. The paper boxes manufactured with it have better cushioning performance than ordinary cardboard boxes and have been widely used in inner packaging and individual sales packaging, with a height of 1.1-2mm and a width of 96 ± 4 pieces per square meter

瓦楞的波形形状

The waveform shape of corrugation

构成瓦楞纸板的波形瓦楞纸的楞形形状分为V形、U形和UV形。

The corrugated paper that forms corrugated cardboard can be divided into V-shaped, U-shaped, and UV shaped shapes.

V形瓦楞波形的特徵是:平面抗压力值高,使用中节省粘合剂用量,节约瓦楞原纸。但这种波形的瓦楞做成的瓦楞纸板缓冲性差,瓦楞在受压或受冲击变霰后不容易恢复。

The characteristic of the V-shaped corrugated waveform is that the plane has a high resistance to pressure, which saves adhesive usage and corrugated paper during use. But the corrugated cardboard made of this waveform has poor cushioning performance, and the corrugated board is not easy to recover after being compressed or impacted.

U形瓦楞波形的特徵是:著胶面积大,粘结牢固,富有一定弹性。当受到外力冲击时,不象V形楞那样脆弱,但平面扩压力强度不如V形楞

The characteristics of U-shaped corrugated waveform are: large adhesive area, strong bonding, and a certain degree of elasticity. When subjected to external impact, it is not as fragile as V-shaped ribs, but the plane expansion pressure strength is not as strong as V-shaped ribs