如今许多传统的手工制作已经迈入了数字化、智能化、机械化制造。这样大大提高生产效率，节约时间和成本。包装盒制作与生产同样如此，下面就和一次性外卖打包盒生产厂家一起来了解一下包装盒制作过程中的流程吧。

Nowadays, many traditional handicrafts have entered digital, intelligent, and mechanized manufacturing. This greatly improves production efficiency, saves time and costs. The same goes for packaging box production. Let's learn about the process of packaging box production with the manufacturer of disposable takeaway packaging boxes.

1.先需要调纸切割成生产规格的面纸。

1. First, it is necessary to adjust and cut the paper into production specifications of face paper.

2.把面纸放在智能印刷设备上印刷面纸。

2. Place the tissue paper on the intelligent printing device to print the tissue paper.

3.制作刀模进行啤，啤是生产工艺的重要环节。在这个环节要进行刀模对位，刀模对不准，严重影响整个包装盒制作的成品。

3. Making a knife mold for beer is an important part of the production process. At this stage, it is necessary to align the knife mold, which can seriously affect the finished product of the entire packaging box.

4.针对面纸过胶，这一工艺流程是为了保护包装盒子制作出来出现面纸磨花等。

4. This process is aimed at protecting the face paper from scratches and other defects during the production of packaging boxes.

5.面纸卡放到机械手下面，进行贴盒等一系列工艺，这样半成品包装盒出来了。

5. Place the tissue paper card under the robotic arm and perform a series of processes such as pasting boxes, so that the semi-finished packaging box comes out.

6.流水线把常规贴好的盒子输送自动成型机位置，利用人工把贴好的盒子放入成型模具上面，启动机器，成型机会依次导致长边，折入长边，压泡包短边，压泡，机器会把盒子们弹到流水线上。

6. The assembly line transports the conventional pasted boxes to the position of the automatic forming machine. The pasted boxes are manually placed on the forming mold, and the machine is started. The forming process sequentially leads to long edges, folding into long edges, pressing short edges, and pressing bubbles. The machine will bounce the boxes onto the assembly line.

7.经过QC把包好的盒子摆放右边，用纸板叠好，清洁胶水，检测不良品。

7. After QC, place the wrapped box on the right side, stack it with cardboard, clean the glue, and detect defective products.

我们在包装盒制作过程中需要注意一些细节问题，常见的问题需要我们注意：

We need to pay attention to some details during the production process of packaging boxes, and common problems need to be noted:

1.面纸在啤的过程中注意正反面，防止面纸过不到胶水，导致盒子边上开胶。

1. During the beer brewing process, pay attention to the front and back sides of the face paper to prevent it from not passing through the glue and causing the glue to open on the edge of the box.

2.包装盒卡的时候要注意高低角，否则盒子到成型机上会压破损。

2. When packaging the box, pay attention to the high and low angles, otherwise the box will be crushed and damaged on the molding machine.

3.在成型机上的时候注意毛刷、毛棍、铲刀上不能有胶水，这样也会导致盒子边上开胶。

3. When using the molding machine, pay attention to the absence of glue on the brushes, bristles, and shovels, as this can also cause glue to open on the edges of the box.

4.胶水的厚度要根据纸张不同进行调节，不能在牙齿上滴胶或者用水性环保白胶。

4. The thickness of the glue should be adjusted according to the different papers, and it cannot be dropped on the teeth or water-based environmentally friendly white glue.

5.还需注意包装盒不能存在空边、开胶、胶水痕、耳朵打皱、爆角、定位歪斜偏大（机器定位设置在正负0.1MM左右）。

5. It is also important to note that the packaging box should not have empty edges, glue marks, ear wrinkles, burst corners, or excessive positioning deviation (the machine positioning should be set at around plus or minus 0.1mm).

在整个生产过程中包装盒在生产之前，都需要先用刀模试出一个样品来，在确认没问题之后才进行大批量下料生产，这样防止假如刀模出了问题也有修改的机会，终确认没问题才能批量生产，正是有着这种研究的态度才能把包装盒制作得很好。有什么事项了解就来咨询我们https://www.sdynbz.com吧！

Throughout the entire production process, packaging boxes need to be tested with a knife mold before production. After confirming that there are no problems, large-scale production can be carried out. This prevents the possibility of modification if there are problems with the knife mold, and mass production can only be carried out after confirming that there are no problems. It is precisely with this research attitude that packaging boxes can be made very well. If you have any questions, please consult us https://www.sdynbz.com Come on!